Whirlpool refrigerator light not working

What to expect when you experience a Whirlpool refrigerator light not working issue

How is the light not working problem fixed?

Correcting most light not working problems usually involves replacing the electronic control board, power supply or user interface control. However, there are many potential causes, so a thorough diagnosis is key to fixing the problem. An accurate diagnosis is essential to understanding how much the repair will be.

Why is the LED light not working on my Whirlpool refrigerator?

A bad door switch, defective LED light assembly, wiring failure or bad control board could prevent the LED light from working in your Whirlpool refrigerator.

Check the refrigerator door switch

If no LED lights work when you open the refrigerator door, unplug the refrigerator and check the refrigerator door switch.

Pull the door switch out and measure resistance through the door switch using a multimeter.

With the door switch activation lever extended to simulate the door being open, you should measure near 0 ohms of resistance. If you measure infinite resistance, replace the door switch.

Here’s a DIY video that shows how to replace the door switch in a refrigerator:

If the door switch is okay, then a bad LED light assembly, wiring failure or bad electronic control board could be preventing the light from working.

Check the LED Light Assembly

With the refrigerator still unplugged, pull the LED light assembly out to check it for damage. Replace the LED light assembly if it’s damaged or you see burn marks on a bulb or its circuit board.

Here’s a video that shows how to replace an LED light assembly in a freezer which will help you see how to replace that same part in a refrigerator:

If the LED light assembly appears to be okay, schedule refrigerator service to have a Sears Home Services technician examine your Whirlpool refrigerator and fix the lighting failure.

Sears Home Services recommendations for a refrigerator light that is not working

When the refrigerator light is not working it can be for many reasons. To avoid replacing unneeded parts we recommend having a Sears Home Services professional perform diagnostic tests to identify the root cause of the problem. Our technicians are experienced at diagnosing all types of refrigerator failures.

What to look out for with a refrigerator light not working diagnosis

Diagnosing modern appliances without proper knowledge and training can be difficult. Without using proper diagnostic techniques, fixing your refrigerator problem will only be achieved through changing parts on a hunch. Appliances, especially in the last 10 years, have become extremely advanced, and many models have electronic parts that are difficult to test. DIY repairs on the latest appliance models are becoming increasingly difficult.

Whirlpool Fridge LED Lights Not Working

Common Causes of Whirlpool Fridge LED Lights Not Working

There are several potential reasons why the LED lights in your Whirlpool fridge may not be functioning. Understanding these common causes can help in diagnosing and fixing the issue effectively.

A faulty LED light bulb might be the simplest solution, as the bulb itself could be burnt out or damaged. Another potential cause is a defective light switch, which might be stuck or malfunctioning, preventing the LED light from turning on when the fridge door is opened. Wiring issues, such as loose or damaged wires, can also disrupt the power supply to the LED lights. Problems with the electronic control board, which manages the lighting, could also be the source of the issue. Finally, a malfunctioning door switch might mean the light does not turn on when the door is opened.

How to Troubleshoot Whirlpool Fridge LED Lights Not Working

If you're experiencing issues with your Whirlpool fridge's LED lights, several troubleshooting steps can be followed.

Inspect the LED light bulb to see if it needs replacement. Next, test the light switch manually to determine if it activates the light; if it doesn't, it may need replacement. Inspect the wiring for any visible signs of damage or loose connections. Sometimes resetting the control board by unplugging the fridge for a few minutes can resolve the issue. Also ensure the door switch is working correctly by pressing it and checking if the light turns on.

When to Call a Professional for Whirlpool Fridge LED Lights Not Working

While some issues can be fixed with DIY methods, others might require professional assistance.

Complex wiring issues or suspicions of such problems should be handled by a professional. Replacing or repairing the electronic control board can be complicated and is best handled by a technician. If the light continues to malfunction despite troubleshooting, a professional diagnosis is recommended to identify and fix the underlying issue.