Samsung dryer light not working

Why is the light not coming on in my Samsung dryer?

A burnt out light bulb, faulty dryer door switch or a wiring failure can prevent the light from working in your Samsung dryer.

Follow these DIY troubleshooting steps to fix the problem.

Replace the Dryer Light Bulb

Follow the instructions in the owner’s manual for your Samsung dryer to replace the drum light.

Be sure to unplug the dryer power cord before beginning that repair.

If you need to have a service technician replace the bulb for you, schedule dryer repair service.

Examine the Door Switch

Check the door switch for damage. If the door switch is damaged or it isn’t working right, replace it.

Here’s a video that shows how to replace the door switch in a dryer:

Use the basic steps shown in that video and the description below to replace a broken door switch in your dryer.

1. Unplug the dryer. If it's a gas dryer, shut off the gas.
2. Remove the top panel mounting screws and lift off the top panel.
3. Disconnect the door switch wire harness.
4. Remove the mounting screws from the existing door switch. Pull the door switch out of the dryer and set it aside for disposal.
5. Insert the new door switch and secure it with the mounting screws. Plug the wire harness for the new switch into the connection plug.
6. Reassemble the dryer and restore electrical power. Turn the gas supply back on if you have a gas dryer.

If you’re not completely confident that you can replace the door switch on your own, schedule dryer repair service and we’ll send a Sears Home Services technician to your home to install a new door switch.

What to expect when you experience a Samsung dryer light not working issue

How is the light not working problem fixed?

Correcting most light not working problems usually involves replacing the light bulb, power supply board or door switch. However, there are many potential causes, so a thorough diagnosis is key to fixing the problem. An accurate diagnosis is essential to understanding how much the repair will be.

Sears Home Services recommendations for a dryer light that is not working

When the dryer light is not working it can be for many reasons. To avoid replacing unneeded parts we recommend having a Sears Home Services professional perform diagnostic tests to identify the root cause of the problem. Our technicians are experienced at diagnosing all types of dryer failures.

What to look out for with a dryer light not working diagnosis

Diagnosing modern appliances without proper knowledge and training can be difficult. Without using proper diagnostic techniques, fixing your dryer problem will only be achieved through changing parts on a hunch. Appliances, especially in the last 10 years, have become extremely advanced, and many models have electronic parts that are difficult to test. DIY repairs on the latest appliance models are becoming increasingly difficult.

A burnt-out drum light in a Samsung dryer complicates verifying if clothes are fully dry. Changing bulbs may not fix socket or wiring faults. Let dryer repair near me check internal connections. A quick solution restores easy visibility each cycle.