Samsung oven not heating

What to expect when you experience a Samsung oven not heating issue

How is the not heating problem fixed?

Correcting most not heating problems usually involves replacing the igniter, electronic control board or bake element. However, there are many potential causes, so a thorough diagnosis is key to fixing the problem. An accurate diagnosis is essential to understanding how much the repair will be.

Sears Home Services recommendations for an oven that is not heating

When the oven is not heating it can be for many reasons. To avoid replacing unneeded parts we recommend having a Sears Home Services professional perform diagnostic tests to identify the root cause of the problem. Our technicians are experienced at diagnosing all types of oven failures.

Why is my Samsung gas oven not heating?

Here’s a popular and safe DIY video that shows how to safely diagnose and repair a Samsung gas oven heating failure:

The first thing that you’ll need to check when your Samsung oven isn’t heating is the gas supply.

Check the Gas Supply

If your surface burners are working, then you know your oven should be getting gas as well. If the burners aren’t working, check your gas supply cut-off valve to make sure that it's open. If it is open and you’re not getting gas, then you need to contact your gas supplier to figure out what’s wrong.

Some ranges have a service cut-off valve on the pressure regulator that shuts off the gas supply to the oven and not the surface burners. If your range has one, make sure that service valve is open.

Here’s an image that shows that service valve:

Test the igniter

Pull the bottom panel out of your cold oven. Start the oven and see if the igniter glows.

If the igniter glows you may be convinced it’s working and want to replace the safety gas valve. But the safety gas valve rarely fails. The igniter can glow but not get hot enough to open the safety gas valve. In fact, this is the most frequent failure when an oven burner won't ignite even though the igniter is glowing bright. Replacing the igniter in this situation usually fixes the problem.

If you're uncertain whether your glowing igniter has failed, you can have a trained service technician check the amp draw through the igniter circuit.

If the igniter wasn’t glowing, you’ll need to use a multimeter to test it.

Unplug the range. For safety, always disconnect power before checking resistance. To check the resistance of the igniter, put the meter leads on the igniter terminals. If you measure between 10 and 2,500 ohms, then you know your igniter is okay.

If the igniter measures no continuity, that’s an OL on this meter, then you need to replace the igniter. Here’s a video showing you how:

Test the safety gas valve

Next, check resistance on the safety gas valve. The safety gas valve should measure less than 5 ohms of resistance. If the safety gas valve measures no continuity, you can have a service technician replace that part.

If the igniter and the safety gas valve both check okay, then you could have a problem with wiring, or a defective electronic control board.

When you’re unable to find and fix a Samsung oven heating problem on your own, schedule repair service and we’ll send a Sears Home Services technician to your home to repair the oven.

Why is my Samsung Electric Oven Not Heating?

To troubleshoot a problem with your Samsung electric oven, follow the tips in this safe DIY video:

What to look out for with an oven not heating diagnosis

Diagnosing modern appliances without proper knowledge and training can be difficult. Without using proper diagnostic techniques, fixing your oven problem will only be achieved through changing parts on a hunch. Appliances, especially in the last 10 years, have become extremely advanced, and many models have electronic parts that are difficult to test. DIY repairs on the latest appliance models are becoming increasingly difficult.

Samsung Oven not Heating Over 150

When your Samsung oven is not heating over 150, follow these troubleshooting tips to fix the problem.

• Reset the oven control board. Shut off the house circuit breaker for the oven for 5 minutes. Reset the circuit breaker to restore electrical power to the oven. The oven control board will reset and reboot. It may begin working properly. Check to see if the oven heats normally after resetting the control board.
• Check the bake element for damage. For an electric Samsung oven not heating over 150, shut off the house circuit breaker for the oven and examine the bake element. If you see a crack or visible damage to the bake element, have a service technician replace that part.
• Examine the bake burner igniter. A weak igniter in a gas Samsung oven can prevent the bake burner from lighting properly. When the igniter is weak, it will light the burner from a cold start-up of the oven but won’t continue to ignite the burner after the control cycles the burner off to maintain oven temperature. Let the oven cool down for more than an hour and then start the oven again in the bake mode. If the burner ignites and heats the oven but then the burner stops working, you’ll likely need to have a technician replace the weak igniter to fix the heating problem.

Samsung Gas Oven Not Heating Over 175

When you have a Samsung gas oven not heating over 175, follow these troubleshooting tips.

• Check the control settings. The Celsius temperature 175 equates to 350 degrees Fahrenheit. If your control panel is displaying temperature in Celsius instead of Fahrenheit, follow the directions in your owner’s manual to switch the control temperature display to Fahrenheit.
• Check the bake burner igniter. A weak or broken bake burner igniter could be causing the heating problem in your Samsung oven. Let the oven cool completely. Pull the bottom panel out of the bottom of the oven so you can see the bake burner and its igniter. Start a bake cycle and see whether the bake igniter glows and lights the bake burner. If the igniter doesn’t glow, you’ll need to have a service technician replace it. If the igniter glows but doesn’t light the burner, the igniter could still be bad even though it glows. If the igniter lights the burner initially but won’t relight the burner after the control cycles off the burner to maintain the set temperature, then the igniter is weak and you’ll need to have a technician replace it.
• Reset the electronic control. Sometimes, resetting the electronic control will fix a problem with your Samsung gas oven not heating over 175. To reset the oven control board, unplug the oven or shut off the house circuit breaker for the oven to completely disconnect electrical power. Leave power off for 5 minutes then plug the oven back in or reset the house circuit breaker for the oven to restore electrical power. The oven control board will reboot and reset. You may then be able to use the oven normally.

If these basic troubleshooting steps don’t help, schedule oven repair service and we’ll send a Sears Home Services technician to your home to fix the oven heating problem.

Samsung Oven Not Heating Over 175

When you discover your Samsung oven not heating over 175, check the control settings. The Celsius temperature 175 equates to 350 degrees Fahrenheit. If your control panel is displaying temperature in Celsius instead of Fahrenheit, follow the directions in your owner’s manual to switch the control temperature display to Fahrenheit.

If your Samsung oven is not heating over 175-degrees Fahrenheit when it’s set to a higher temperature such as 400-degrees, follow these troubleshooting steps to help resolve the heating issue.

• Check the bake element. For an electric Samsung oven, unplug the power cord or shut off the house circuit breaker to disconnect electrical power. Examine the bake element for cracks or damage. If you see visible damage to the bake element, have a service technician replace that part.
• Check the bake burner igniter. For a gas Samsung oven not heating over 175, let the oven cool down completely. Remove the bottom panel inside the oven cavity so your can see the igniter. Start a bake cycle and see if the bake burner igniter glows. If that igniter doesn’t glow, then you may need to have a technician replace it. A control board problem or wiring failure can also prevent the bake burner igniter from glowing. If the igniter glows but doesn’t ignite the burner, the igniter may be weak. You’ll likely need to have a service technician replace the igniter in this situation as well. If the igniter lights the bake burner from a cold start-up of the oven but fails to continue igniter the burner after the oven heats up, then the igniter is likely weak and will need replacing. Schedule oven repair service to have a Sears Home Services technician examine your oven and fix the heating problem when you suspect a weak igniter is preventing the oven from heating properly.
• Reset the oven control board. Sometimes, resetting the electronic control board in your oven will fix a heating problem. To reset the oven control board, unplug the oven power cord or shut off the house circuit breaker for the oven to completely disconnect electrical power from the appliance. Wait 5 minutes and then restore power to the oven. The oven control board will reboot and reset. It may begin working as it should so your oven heats properly. If not, you’ll likely need to schedule oven repair service to have a repair technician fix the oven.
  A Samsung oven that refuses to heat might have an igniter fault (in gas models) or a dead element (electric). Resetting the display won’t correct physical damage or a clogged burner. Rather than debating an uncertain DIY fix, schedule oven service near me. A professional approach ensures your oven recovers full heating power.