GE Monogram dishwasher no power

Common reasons your GE Monogram dishwasher has no power

The most common reasons your GE Monogram dishwasher has no power are a defective electronic control board, damaged user interface control or a damaged power supply board.

  • 47%

    47% of the time it's the
    Electronic Control Board

  • 19%

    19% of the time it's the
    User Interface Control

  • 9%

    9% of the time it's the
    Power Supply Board

  • 25%

    25% of the time it's the
    Something else

Schedule your dishwasher repair now!

We can help! Our service technicians have the expertise to fix your GE Monogram dishwasher - no matter where you bought it!

Call (646) 440-2692 or schedule online now.
Chat

Most common repairs needed to fix a GE Monogram dishwasher

Electronic Control Board Replacement

A dishwasher that has no power could have a defective electronic control board. The control board will freeze up and fail to power up the control panel when its internal memory and logic is corrupted. A failed internal electronic relay or bad electronic part on the circuit board could be causing the control board to freeze up and not continue working properly. Determining whether a control board is defective is difficult. Have a Sears Home Services technician diagnose and repair your dishwasher when it stops working.

User Interface Control Replacement

When your dishwasher has no power, a damaged user interface control could be causing the problem. The user interface control connects to the electronic control board through a wire harness and sends signals to the control board to help control the dishwashing cycle. A bad power key on the user interface control can prevent the dishwasher from powering up. Also, a stuck key on the user interface control can cause the electronic control board to stop the cycle and the dishwasher won’t work until the damaged user interface control is fixed. Have a Sears Home Services Repair Expert visit your home and replace the user interface control if it’s damaged.

Power Supply Board Replacement

When your dishwasher has no power, a damaged power supply board could be causing the problem. The power cord connects directly to the power supply board and the power supply board sends power to the electronic control board to power up and operate the dishwasher. When your dishwasher is completely dead and it is getting power through the power cord, you’ll need to have a Sears Home Services Technician check out the power supply board and replace it if it’s damaged.

What to expect when you experience a GE Monogram dishwasher no power issue

How is the no power problem fixed?

Correcting most no power problems usually involves replacing the electronic control board, user interface control or power supply board. However, there are many potential causes, so a thorough diagnosis is key to fixing the problem. An accurate diagnosis is essential to understanding how much the repair will be.

Sears Home Services recommendations for a dishwasher that has no power

When the dishwasher has no power it can be for many reasons. To avoid replacing unneeded parts we recommend having a Sears Home Services professional perform diagnostic tests to identify the root cause of the problem. Our technicians are experienced at diagnosing all types of dishwasher failures.

What to look out for with a dishwasher no power diagnosis

Diagnosing modern appliances without proper knowledge and training can be difficult. Without using proper diagnostic techniques, fixing your dishwasher problem will only be achieved through changing parts on a hunch. Appliances, especially in the last 10 years, have become extremely advanced, and many models have electronic parts that are difficult to test. DIY repairs on the latest appliance models are becoming increasingly difficult.

Zero lights or motor action on a GE Monogram dishwasher often signal a tripped fuse or dead control board. Basic resets rarely fix complex electrical faults. Rather than going back to the sink, schedule dishwasher repair in my area. Reviving power helps your Monogram handle each load as intended.

What our customers say about us

With more than 1.3 Million 5 Star Reviews, you don't have to take our word for it

Thorough

James called to give an estimated arrival time. He was professional and personable. He had 2 professional ideas of the problem and found 1 was correct, but he didn't stop there. He did a thorough check of the appliance. 1 small part was needed. He ordered the part to my house. Fortunately, he was able to schedule for the next week, just before Thanksgiving. As before, he called ahead, arrived and quickly fixed the problem. My appliance is working perfectly.


Kirsten A, Oxford, PA

Service Call

Luke was great. Polite and knowledgeable even though the dishwasher was older than he!


James G, Hillsboro, MO

Daniel

Daniel went above and beyond to fix my dish washer. Very pleasant to deal with.


Paul F, Hghlnds Ranch, CO

Frequently Asked Questions

Why isn’t my GE Monogram dishwasher powering on?
Check the power supply, verify the circuit breaker is on, and check the light switch beside the kitchen sink to make sure it's turned on.
Could a blown fuse cause my GE Monogram dishwasher to not turn on?
Yes, a blown fuse or malfunctioning control board may prevent power to the dishwasher. Check the fuse and replace it if necessary.
How do I fix a GE Monogram dishwasher that isn’t turning on?
Inspect the power supply, check the fuse, and ensure the dishwasher power switch beside the kitchen sink is turned on. If needed, replace the control board.
What causes a GE Monogram dishwasher to have no power?
Power issues can result from a blown fuse, defective control board, or power supply problems. Inspect these components for failure.

Repair Dishwasher Resources

A middle-aged man ensures his dishwasher runs smoothly by loading it correctly, as part of regular appliance care to prevent drainage issues.
7 min readApr. 16

Learn how to drain a GE dishwasher with our step-by-step guide. Keep your dishwasher running smoothly with our expert tips.

Banner image for blog article "Why Won't my Dishwasher Turn On?"
6 min readApr. 07

Find out why your dishwasher won’t turn on and get expert tips from Sears Home Services to fix the problem.

Photo of an open Kenmore dishwasher in white modern kitchen
5 min readMar. 04

If you've ever encountered a dishwasher with standing water, you understand the frustration of a drainage issue.

Simple Steps to Replace a Blocked Dishwasher Spray Arm
6 min readMar. 04

If the dishes in your dishwasher are no longer getting clean, it could be the spray arm is clogged.

Glossary Terms

A dishwasher sump is located at the bottom of the dishwasher, serving as a collection point for water during the wash cycle. It houses the main pump and filter, facilitating the recirculation and drainage of water, essential for the cleaning process.

A dishwasher turbidity sensor is an advanced feature that measures the level of food particles and debris in the water, allowing the dishwasher to adjust the wash cycle length and water usage for optimal cleaning efficiency.

Hard water is water that contains high levels of dissolved minerals, particularly calcium and magnesium. It contrasts with soft water, which has lower concentrations of these minerals.

An astragal is a molding or strip that covers or seals the gap between the edges of a pair of doors or windows. Its primary functions are to provide a weather seal, improve security, and improve the aesthetic appearance of door and window assemblies.

Additional possible GE Monogram dishwasher symptoms you may experience