GE Dishwasher lights flashing and will not start

What to expect when you experience a GE dishwasher with lights flashing that will not start

Expert tips for resolving a problem with a GE dishwasher with flashing lights that will not start

Fixing a GE dishwasher with flashing lights that will not start often involves replacing the PCB, user interface control or a wiring connector. However, there may be other issues causing the lights to blink, so a full diagnosis is essential to fixing the problem. An accurate diagnosis is essential to fixing the problem right.

Our recommendations for fixing a GE dishwasher with flashing lights that will not start

When your GE dishwasher is flashing lights and will not start, it can be for many reasons. To avoid replacing unneeded parts we recommend having a Sears Home Services professional perform diagnostic tests to identify the root cause of the problem. Our technicians are experienced at diagnosing all types of dishwasher failures.

What to look out for with a GE dishwasher that is flashing lights and will not start

Diagnosing modern appliances without proper knowledge and training can be difficult. Without using proper diagnostic techniques, fixing your refrigerator problem will only be achieved through changing parts on a hunch. Appliances, especially in the last 10 years, have become extremely advanced, and many models have electronic parts that are difficult to test. DIY repairs on the latest appliance models are becoming increasingly difficult.

When you need professional GE dishwasher repair near me to fix a problem, schedule an appointment with Sears Home Services.

What Causes Lights to Blink and Prevents the Cycle from Starting on a GE Dishwasher?

Pressing the Start/Reset button during the cycle will cause the Start light to blink and the drain pump will run for a minute to a minute and a half. You can then start a new cycle.

If a power outage, the control will reset and when the GE dishwasher powers back up, the drain pump will run for a minute to a minute and a half and the Start light will blink. You can then start a new cycle and the dishwasher will run normally.

On some GE dishwasher models, the control will start a Normal wash cycle after the drain pump stops.

Here’s a video that illustrates these aspects of your GE dishwasher:

How Do I Reset a GE Dishwasher?

If the controls are unresponsive on your GE dishwasher and lights are blinking, a power surge or glitch through the electrical power lines supplying your home may have corrupted electronic control board operations.

To reset the GE dishwasher control board, unplug the dishwasher or shut off the house circuit breaker for the dishwasher to completely disconnect power from the appliance for 2 minutes. Restore power and the control board will reboot and reset.

You may then be able to use the dishwasher normally.

If not, schedule service and we’ll send a Sears Home Services technician to your home to repair the GE dishwasher.

Flashing lights on a GE dishwasher often point to a stuck button or software glitch. Without a proper reset, you’re stuck in limbo and handwashing your plates. To regain full automation, call dishwasher maintenance near me. Once the error is cleared, your dishwasher can start regular cycles again.