Fisher & Paykel oven not working

Why isn't my Fisher and Paykel oven turning on?

A Fisher & Paykel oven suddenly not getting power could have a tripped house circuit breaker.

Check the house circuit breaker for the oven and reset the breaker if you find it tripped. This may restore power to the oven.

Some ovens have a high-temperature thermostat in the control area that will trip if temperature near the control board reaches 300 degrees or higher. This thermostat will not reset so you’ll need to have the oven repaired when it won’t power up because that thermostat tripped.

A wiring failure in the power supply circuit going to the electronic control board or a defective electronic control board can cause a dead display in an oven.

When you’re unable to find and fix the power problem with your oven on your own, schedule oven repair service and we’ll send a Sears Home Services technician to your home to fix the appliance.

Why is my oven not heating?

If the display gets power but your oven won’t heat, a power problem, failed electronic control board, defective temperature sensor, wiring failure, bad bake element or tripped safety thermostat could be causing the problem. Also, an error code in the display on the control panel will prevent the oven from working.

For an electric oven that won’t heat, check the house circuit breakers because a tripped circuit breaker can prevent the oven from heating even though the display works.

Check the bake element

Shut off the house circuit breaker for the oven and check the bake element for damage. If the bake element is physically damaged, replace it.

Here’s a video that shows how to replace the bake element in an oven:

If the bake element in your oven is different and/or you need to have a service technician replace element for you, schedule appliance repair and we’ll install a new bake element for you.

What to expect when you experience a Fisher & Paykel oven not working issue

How is the not working problem fixed?

Correcting most not working problems usually involves replacing the electronic control board, igniter or control thermostat. However, there are many potential causes, so a thorough diagnosis is key to fixing the problem. An accurate diagnosis is essential to understanding how much the repair will be.

Sears Home Services recommendations for an oven that is not working

When the oven is not working it can be for many reasons. To avoid replacing unneeded parts we recommend having a Sears Home Services professional perform diagnostic tests to identify the root cause of the problem. Our technicians are experienced at diagnosing all types of oven failures.

What to look out for with an oven not working diagnosis

Diagnosing modern appliances without proper knowledge and training can be difficult. Without using proper diagnostic techniques, fixing your oven problem will only be achieved through changing parts on a hunch. Appliances, especially in the last 10 years, have become extremely advanced, and many models have electronic parts that are difficult to test. DIY repairs on the latest appliance models are becoming increasingly difficult.

A Fisher & Paykel oven that won’t power on might be dealing with defective power cords, circuit boards, or internal safety locks. Random part swaps risk inflating costs and missing the true fault. To secure lasting fixes, schedule oven technician service that pinpoints each failed component. A professional repair approach helps you avoid unnecessary spending and persistent oven downtime.