Crosley dishwasher not draining

Common reasons your Crosley dishwasher is not draining

The most common reasons your Crosley dishwasher is not draining are a failed drain pump, cracked drain hose or a defective electronic control board.

  • 61%

    61% of the time it's the
    Drain Pump

  • 17%

    17% of the time it's the
    Drain Hose

  • 13%

    13% of the time it's the
    Electronic Control Board

  • 9%

    9% of the time it's the
    Something else

Schedule your dishwasher repair now!

We can help! Our service technicians have the expertise to fix your Crosley dishwasher - no matter where you bought it!

Call (646) 440-2692 or schedule online now.
Chat

Most common repairs needed to fix a Crosley dishwasher

Drain Pump Replacement

A dishwasher that’s not draining often has a failed drain pump. The drain pump motor could be bad or the drain pump impeller could be damaged. The drain pump may make a loud noise when the impeller is damaged. The motor may make a loud buzzing noise or not make any noise at all if it isn’t spinning the impeller during the drain portion of the dishwashing cycle. The drain pump is hard to access so you’ll need to have a Sears Home Services Technician check out the drain pump and replace it if it isn’t working.

Drain Hose Replacement

When the dishwasher will not drain properly, a cracked or clogged drain hose could be causing the failure. The drain hose connect to the drain pump and carries wastewater to the sink drain. The drain hose has a check valve to prevent drain water from siphoning back into the dishwasher at the end of the drain routine. A cracked hose or check valve can let water blow back into the tub when the drain pump stops. Accessing the drain hose is difficult so you’ll need to have a Sears Home Services Repair Expert fix the drain hose when it’s cracked or damaged.

Electronic Control Board Replacement

If your dishwasher is not draining, you can suspect that it has a defective electronic control board if the drain pump doesn’t run. The control board should send electrical current to the drain pump during the drain portion of the dishwashing cycle. A failed relay or corrupted logic on the circuit board could prevent the control board from sending electrical current to the drain pump. Determining whether an electronic control board is defective is difficult. Have a Sears Home Services Repair Expert visit your home and fix the dishwasher when it is not draining.

What to expect when you experience a Crosley dishwasher not draining issue

How is the not draining problem fixed?

Correcting most not draining problems usually involves replacing the drain pump, drain hose or electronic control board. However, there are many potential causes, so a thorough diagnosis is key to fixing the problem. An accurate diagnosis is essential to understanding how much the repair will be.

Sears Home Services recommendations for a dishwasher that is not draining

When the dishwasher is not draining it can be for many reasons. To avoid replacing unneeded parts we recommend having a Sears Home Services professional perform diagnostic tests to identify the root cause of the problem. Our technicians are experienced at diagnosing all types of dishwasher failures.

What to look out for with a dishwasher not draining diagnosis

Diagnosing modern appliances without proper knowledge and training can be difficult. Without using proper diagnostic techniques, fixing your dishwasher problem will only be achieved through changing parts on a hunch. Appliances, especially in the last 10 years, have become extremely advanced, and many models have electronic parts that are difficult to test. DIY repairs on the latest appliance models are becoming increasingly difficult.

A Crosley dishwasher that leaves standing water often signals a clogged drain line or failing pump. Residual moisture can grow stale and affect cleaning results in the next load. Rather than emptying water by hand, contact appliance repair near me dishwasher. Restoring proper drainage ensures your Crosley completes cycles cleanly.

What our customers say about us

With more than 1.3 Million 5 Star Reviews, you don't have to take our word for it

Thorough

James called to give an estimated arrival time. He was professional and personable. He had 2 professional ideas of the problem and found 1 was correct, but he didn't stop there. He did a thorough check of the appliance. 1 small part was needed. He ordered the part to my house. Fortunately, he was able to schedule for the next week, just before Thanksgiving. As before, he called ahead, arrived and quickly fixed the problem. My appliance is working perfectly.


Kirsten A, Oxford, PA

Service Call

Luke was great. Polite and knowledgeable even though the dishwasher was older than he!


James G, Hillsboro, MO

Daniel

Daniel went above and beyond to fix my dish washer. Very pleasant to deal with.


Paul F, Hghlnds Ranch, CO

Frequently Asked Questions

Why won’t my Crosley dishwasher drain water?
A clogged drain hose, obstructed filter, or faulty drain pump can lead to stagnant water. Check the filter and hose for blockages first.
How do I unclog the drain hose in a Crosley dishwasher?
Disconnect power, remove the lower access panel, and detach the hose. Flush it with water or use a brush to clear any debris, then reattach.
Can a broken drain pump motor cause drainage problems?
Yes. If the motor has failed or the impeller is damaged, water won’t be expelled. A continuity test can confirm if the pump is still functioning.
When should I seek professional help for a Crosley dishwasher not draining?
If cleaning the hose and filter doesn’t fix the issue, the pump or control board may be malfunctioning. A qualified technician can diagnose more complex issues.

Repair Dishwasher Resources

A middle-aged man ensures his dishwasher runs smoothly by loading it correctly, as part of regular appliance care to prevent drainage issues.
7 min readApr. 15

Learn how to drain a GE dishwasher with our step-by-step guide. Keep your dishwasher running smoothly with our expert tips.

Banner image for blog article "Why Won't my Dishwasher Turn On?"
6 min readApr. 07

Find out why your dishwasher won’t turn on and get expert tips from Sears Home Services to fix the problem.

Photo of an open Kenmore dishwasher in white modern kitchen
5 min readMar. 04

If you've ever encountered a dishwasher with standing water, you understand the frustration of a drainage issue.

Simple Steps to Replace a Blocked Dishwasher Spray Arm
6 min readMar. 04

If the dishes in your dishwasher are no longer getting clean, it could be the spray arm is clogged.

Glossary Terms

A dishwasher sump is located at the bottom of the dishwasher, serving as a collection point for water during the wash cycle. It houses the main pump and filter, facilitating the recirculation and drainage of water, essential for the cleaning process.

A dishwasher turbidity sensor is an advanced feature that measures the level of food particles and debris in the water, allowing the dishwasher to adjust the wash cycle length and water usage for optimal cleaning efficiency.

Hard water is water that contains high levels of dissolved minerals, particularly calcium and magnesium. It contrasts with soft water, which has lower concentrations of these minerals.

An astragal is a molding or strip that covers or seals the gap between the edges of a pair of doors or windows. Its primary functions are to provide a weather seal, improve security, and improve the aesthetic appearance of door and window assemblies.

Chat