10 Reliable Methods to Unclog Your Toilet: 2025

Discover 10 expert ways to unclog your toilet, from simple plungers to surprising hacks like wire hangers and vacuums—#7 might just save your day!
KEY TAKEAWAYS
- Simple tools like plungers and dish soap can resolve most minor toilet clogs effectively.
- For stubborn clogs, tools like a toilet auger or a wet/dry vacuum offer a reliable solution.
- Prevent clogs by flushing responsibly and scheduling routine plumbing maintenance.
A clogged toilet can throw your day off course, but you don’t need to let it ruin everything. With the right tools, techniques, and preventive measures, you can resolve most blockages efficiently and prevent them from happening again. This guide outlines 10 proven methods to unclog your toilet, complete with detailed instructions, examples, and practical advice to keep your plumbing running smoothly.
1. Assess the Severity of the Clog
Before attempting any fixes, evaluate the situation. Understanding the type and severity of the clog can help you choose the most effective method.
Symptoms of Clogs
- Slow Draining Water: Indicates a minor blockage that can often be cleared with a plunger or simple techniques.
- Standing Water: A sign of a severe blockage that requires immediate attention.
- Recurring Blockages: May indicate deeper plumbing issues or improper flushing habits.
Example
If flushing the toilet causes water to rise in nearby fixtures like sinks or tubs, the issue may be in the main sewer line. In this case, professional help is often required.
Quick Tip
Avoid flushing the toilet multiple times if it’s clogged. Repeated flushing can cause water to overflow, making the problem worse and harder to clean up.
2. Use the Right Plunger
Plungers are household staples for a reason—they’re simple and effective for many minor blockages. However, not all plungers are the same, and using the correct one is crucial.
Types of Plungers
- Flange Plunger: Specifically designed for toilets, with a rubber flap that creates a tight seal over the drain.
- Cup Plunger: Best suited for flat surfaces like sinks, but less effective for toilets.
Proper Plunging Technique
- Ensure the plunger’s rubber head is submerged in water. Add water to the bowl if necessary.
- Position the plunger over the drain hole, forming a snug seal.
- Use steady, firm motions to push and pull for 20–30 seconds.
- Check if the water drains. Repeat if necessary, or try another method if the clog persists.
Pro Tip
Run the plunger under hot water before use to soften the rubber, improving its flexibility and suction power.
3. Hot Water and Dish Soap
For clogs caused by grease or soft organic materials, hot water and dish soap can be highly effective.
Steps
- Add a generous amount of dish soap to the toilet bowl.
- Heat a bucket of water until it’s hot but not boiling. Pour the water into the bowl from waist height to generate pressure.
- Allow the mixture to sit for 10–15 minutes. Flush to test if the blockage has cleared.
Why It Works
The dish soap acts as a lubricant, while the hot water softens grease and waste buildup.
Example
This method works particularly well for clogs caused by excessive toilet paper or soap residue.
4. Use a Toilet Auger
A toilet auger, also known as a plumbing snake, is an indispensable tool for clogs located deeper in the pipes.
How to Use a Toilet Auger
- Insert the auger’s flexible coil into the toilet drain, feeding it gently to avoid scratching the porcelain.
- Turn the handle clockwise to navigate the pipe and reach the clog.
- When resistance is felt, twist the handle to latch onto or break apart the blockage.
- Pull the auger out and flush to confirm the clog is gone.
Example
This method is ideal for removing non-flushable items like toys, wipes, or large amounts of toilet paper that are stuck deep in the pipes.
5. Baking Soda and Vinegar
For those who prefer natural remedies, baking soda and vinegar offer an eco-friendly way to tackle minor clogs without harsh chemicals.
Steps
- Pour 1 cup of baking soda into the toilet bowl.
- Slowly add 2 cups of vinegar, allowing the mixture to fizz and bubble.
- Let the solution sit for at least 30 minutes. Follow with a bucket of hot water and flush.
Why It Works
The chemical reaction between baking soda and vinegar helps break down organic matter and grease, clearing the way for water to flow freely.
Pro Tip
This method is most effective for biodegradable clogs, such as those caused by toilet paper or small food particles.
6. Use a Wet/Dry Vacuum
A wet/dry vacuum can provide powerful suction to remove stubborn clogs near the surface.
Steps
- Use the vacuum to remove standing water from the toilet bowl.
- Wrap a towel around the vacuum hose to create a seal, then insert it into the drain.
- Turn the vacuum on to suction out the clog. Flush afterward to confirm the blockage is gone.
Warning
Never use a standard household vacuum for this method, as it isn’t designed for liquids and could be damaged.
7. The Wire Hanger Hack
If you don’t have specialized tools, a wire hanger can serve as a makeshift plumbing snake for shallow clogs.
Steps
- Straighten the wire hanger and wrap one end with a cloth to protect the porcelain surface.
- Insert the hanger into the drain and use gentle motions to dislodge the clog.
- Flush to ensure the blockage is cleared.
Example
This hack is useful for clogs caused by hair, wipes, or small objects near the drain opening.
8. Commercial Drain Cleaners
If other methods fail, commercial drain cleaners may help. However, they should be used sparingly to avoid damaging your pipes.
How to Use
- Choose a product labeled safe for toilets and follow the instructions carefully.
- Pour the recommended amount into the toilet bowl.
- Allow it to sit for the specified time before flushing with hot water.
Warning
Frequent use of chemical cleaners can weaken pipes over time. Reserve this method for occasional emergencies only.
9. Prevent Future Clogs
Prevention is always better than cure. Making a few small changes to your habits can significantly reduce the risk of clogs.
Do
- Flush only toilet paper and human waste.
- Use minimal amounts of toilet paper to prevent buildup.
- Teach children proper toilet use and what not to flush.
Don’t
- Flush wipes, even if labeled “flushable.”
- Pour grease, oils, or food scraps into the toilet.
Maintenance Tip
Schedule regular plumbing inspections to catch small issues before they become major problems.
10. Know When to Call a Professional
If your DIY efforts fail, it may be time to call in a plumber. Persistent blockages or unusual plumbing behavior often signal more serious issues.
Signs You Need Help
- Water backs up into other fixtures, such as sinks or tubs.
- Gurgling noises occur when flushing.
- The toilet remains clogged despite multiple attempts to clear it.
Expert Assistance
For reliable plumbing services, visit HVAC repair near me to connect with trusted professionals.
Frequently Asked Questions
Schedule your HVAC maintenance now!
HVAC checkups from Sears Home Services help keep your heating and cooling system running at its best. Prevent costly repairs and can make your HVAC system more energy efficient with routine maintenance.
Schedule your HVAC maintenance now!
Maintain HVAC Resources
Get ready for Memorial Day with stunning decoration tips and preparation advice for your home from Sears Home Services.
Learn about the must-have items on your "let's get it done" summer checklist.
Get your home ready for spring with our comprehensive 2025 home maintenance checklist.
When the leaves are turning and there’s a chill in the air, there’s no denying that winter is on its way.
Glossary Terms
A capacitor in an AC unit is an electrical component that stores and releases electrical energy to help start the motor and stabilize the voltage during operation.
ENERGY STAR appliances are energy-efficient products that meet the strict energy efficiency specifications set by the U.S. Environmental Protection Agency or the U.S. Department of Energy. These appliances are designed to use less energy and water, leading to cost savings and a reduced environmental impact.
The 608 Certification, mandated by the Environmental Protection Agency (EPA), is required for HVAC technicians to legally handle refrigerants. It ensures technicians understand refrigerant types, environmental impact, and proper handling techniques.
A compressor is a mechanical device that increases the pressure of a gas by reducing its volume, essential in various systems including refrigerators, air conditioners, and HVAC units for cooling and refrigeration processes.
Common Appliance Symptoms
The most common reasons your Amana dishwasher won't drain are a failed drain pump, faulty pump and motor assembly or a cracked drain hose.
The most common reasons your Kenmore Elite refrigerator stopped working are a locked compressor, damaged evaporator or a defective electronic control board.
The most common reasons your Maytag refrigerator stopped working are a locked compressor, damaged evaporator or a defective electronic control board.
The most common reasons your Bosch dishwasher has no heat are a defective electronic control board, clogged water valve or a broken detergent dispenser.
The most common reasons your Kenmore Elite microwave has no power are a bad thermostat, malfunctioning electronic control board or a broken switch.
The most common reasons your Kenmore refrigerator is noisy are a faulty ice maker assembly, defective electronic control board or a locked compressor.