GE microwave not working

What to expect when you experience a GE microwave not working issue

How is the not working problem fixed?

Correcting most not working problems usually involves replacing the thermostat, electronic control board or switch. However, there are many potential causes, so a thorough diagnosis is key to fixing the problem. An accurate diagnosis is essential to understanding how much the repair will be.

Sears Home Services recommendations for a microwave that is not working

When the microwave is not working it can be for many reasons. To avoid replacing unneeded parts we recommend having a Sears Home Services professional perform diagnostic tests to identify the root cause of the problem. Our technicians are experienced at diagnosing all types of microwave failures.

What to look out for with a microwave not working diagnosis

Diagnosing modern appliances without proper knowledge and training can be difficult. Without using proper diagnostic techniques, fixing your microwave problem will only be achieved through changing parts on a hunch. Appliances, especially in the last 10 years, have become extremely advanced, and many models have electronic parts that are difficult to test. DIY repairs on the latest appliance models are becoming increasingly difficult.

GE Microwave Will Not Heat Troubleshooting

When your GE microwave will not heat, check the settings to make sure the heat level is set on high or the appropriate level to heat the food in the microwave. Adjust the heat level if necessary.

Resetting the electronic control board in your microwave can sometime restore heating. Unplug the microwave power cord for 1 minute then plug it back in to restore power. This will reboot the main electronic control board and other electronic components inside the microwave. See if the microwave heats after restoring power.

If the microwave still doesn’t heat after resetting the control board, you’ll likely need to have it serviced. A GE microwave has several safety devices to keep it from overheating and causing injuries. A thermostat above the cooking cavity of the microwave trips and shuts of heating if it detects unusually high temperatures inside the microwave. A similar thermostat beside the magnetron shut off heating if the magnetron overheats. The microwave also has fuses that will trip if a short circuit occurs in the wiring or a component.

In addition to safety devices that can trip or fail to prevent your GE microwave from heating, a bad magnetron, failed high-voltage capacitor, faulty electronic control board or wiring failure can also prevent the microwave from heating. With so many possible causes for a GE microwave that will not heat, it’s best to have a service technician diagnose the appliance and fix the problem. Schedule microwave repair service now and we’ll send a Sears Home Services technician to your home to fix the problem.